New Steel Roll Forming Machine

The roll forming machine is mainly composed of a

frame, roller systems, a transmission device, a roller cover, a feeding device, a hydraulic system, a torque support, a main bearing lubrication system, an electrical system, etc. Partly composed.

Main features of roll forming machine

1. Roll forming machine can increase the output:
install a roll pressing machine in the system, the load metal strip uncoiler will be transmitted to the roller through the diameter of its double roll, so that it can be deformed, and the potential ability can be fully utilized, increasing the output by 50-100% The total energy consumption can be reduced by 20% -30%, which improves the production efficiency of the entire system.

2. Reducing power consumption: The use of a roller
press during operation can significantly reduce the total power consumption of the system. Compared with the traditional bending method, it can save 25-50%
energy, and the annual energy saving benefit is considerable.

Steel Roll Forming Machine

Roll forming machine for making steel box technology data

Item		Technology parameter
Material	Material	cold-roll strip,galvanized steel strip
	Thickness	1.0-1.5mm（base on 1.5mm design, when T.1mm effect alittle not good as 1.5mm）
	Coil Inner	Ф360—Ф510
Process	Form Speed	0-13m/min
	Length	Not limit
Quality	Length Precision	L≤1000mm：±0.5㎜
	Straight, Deflection	L≤1000mm，Bend no more than 1mm；Deflection no more than 2mm
	Forming size	As per design